AUTO
REO’s $21,500 Runabout Is a Two-Year, 50,000-Person Bet
REO Runabout trucks start at an estimated $21,500 with 50,000 refundable deposits, while horsepower, the Texas plant, and 2028 deliveries stay open.
REO Industries said on November 17 that paid reservations for its REO Runabout trucks had crossed 50,000. Each hold is a refundable $25, a place in line rather than an order.
The Dallas company revealed the T4X, T4C and S4C a day earlier, with the two-door T4X aimed at an estimated $21,500. First deliveries are targeted for late 2028 or early 2029, and horsepower has not been published.
50,000 Deposits Landed Before Any Horsepower
The November 16 press release put paid holds at more than 40,000 when the covers came off. The next day the company’s account said the line had crossed 50,000 on reveal day, with over 4,000 new names that day, the largest single day so far.
Reservations opened on June 16, 2026, five months before anyone saw the finished exterior. At $25 a hold, 50,000 names equal $1.25 million sitting with the company. Cancel before a Purchase Agreement and the card is refunded in about 5 to 10 business days. Buy later and the $25 comes off the truck.
REO is blunt about what the money is not. Positions are approximate and not guaranteed. Switching among the T4X, T4C and S4C does not change a reservation number. Merchandise does not move anyone up. Launch states have not been named, and California plus some other states still have no date because of their own emissions rules.
THE $25 LINE
- The hold: $25 via Stripe, refundable for any reason until a Purchase Agreement is signed.
- The pile: 50,000 paid reservations as of the November 17 company post, including over 4,000 on November 16.
- The wait: Pilot builds in 2027, an order book in 2028, first trucks in late 2028 or early 2029.
- The limit: A reservation is not an order, and not every state will get trucks at launch.
That is a cheap ticket into a two-year queue. It is also a test of whether people will park $25 on a truck whose engine supplier, output, and assembly address are still blank.
REO crossed 50,000 reservations yesterday and we’re still going.
Five months ago we asked you to get in line for an honest, affordable truck nobody had seen yet. On reveal day you finally met the Runabout, and over 4,000 reservations came in, our biggest day yet.
Not in line… pic.twitter.com/hk33vZHOZO
— REO Industries (@reoindustries) November 17, 2026
What $21,500 Is Supposed to Buy
The T4X is a two-seat, two-door work truck on a stamped-steel ladder frame, with a starting estimate of $21,500 before tax, title, registration, and delivery. REO says the T4C crew cab starts at $25,000 and the S4C family SUV at $28,500, and that those figures include no destination or documentation add-ons.
All three share a 119.6-inch wheelbase and the same cabin from the bumper to the B-pillar. A naturally aspirated gas inline-four sits north-south, with a six-speed manual on the floor as standard and an automatic as the extra. Part-time 4WD uses a mechanical transfer case and a low-range lever. Solid axles are specified at both ends, with a locking rear differential on the options list.
The first truck due is the T4X. Its 79.1-inch drop-side steel bed is 70.6 inches wide between the walls and has no wheel humps, so a pallet can sit flat. Overall length is 196.5 inches. Integrated steps climb the body, a roof Mount Panel takes lights, and the tailgate carries a ruler, cup holders, device recesses, and a bottle opener on each side.
THE THREE RUNABOUTS
| Model | Starting estimate | Seats / doors | Length | Cargo |
|---|---|---|---|---|
| T4X work truck | $21,500 | 2 / 2 | 196.5 in | 79.1 in steel tray |
| T4C crew cab | $25,000 | 5 / 4 | 195.6 in | 54.1 in bed |
| S4C family SUV | $28,500 | 6 / 4 | 182.7 in | Lockable well, swing-out spare |
The T4C gives up 25 inches of bed to add a second row, then uses an extendable tailgate when the load runs long. The S4C is the short one, with a side-hinged tailgate, a fold-away jump seat, and a lockable passenger-side well. Platform targets, still untested, are 2,500 lb of payload and 5,000 lb of towing, plus 22 to 25 mpg combined and 500 to 600 miles on a tank.
Stock ride sits on 245/70R17 all-seasons, with a 42.5-degree approach angle. The Ransom package, sold at launch, adds 2.5 inches of height, 265/70R17 KO3 all-terrains, and dampers that take approach to 48.3 degrees and breakover from 16.3 to 21.2. T4X height moves from 71.4 to 73.9 inches. REO labels every one of those figures an engineering target, subject to change, and says no truck has been tested yet.
Ford’s Small Truck Trails by 1,000 Pounds
The live small pickup on U.S. lots is Ford’s Maverick, a unibody five-seater. Ford lists the 2027 XL hybrid so the Maverick starts at $28,145, which is $6,645 above the T4X estimate. Maximum payload is 1,500 lb. Maximum towing is 4,000 lb, and only with the 4K Tow Package; the standard rating is 2,000 lb. The bed is 54.4 inches, a tenth of an inch longer than the T4C’s box and more than two feet shorter than the T4X tray.
If REO’s targets hold, the ladder-frame trucks beat the Maverick by 1,000 lb on payload and by 1,000 lb on max tow, while undercutting the sticker. They also ask the buyer to wait years for a four-cylinder with no published horsepower, against a hybrid Ford already rated at up to 42 mpg in the city.
THE PRICE AND LOAD GAP
| Measure | REO Runabout (targets) | 2027 Ford Maverick |
|---|---|---|
| Starting price | $21,500 estimate (T4X) | $28,145 MSRP (XL) |
| Structure | Stamped-steel ladder frame | Unibody |
| Max payload | 2,500 lb | 1,500 lb |
| Max towing | 5,000 lb | 4,000 lb with 4K Tow Package |
| Standard transmission | Six-speed manual | Automatic / CVT |
| 4WD | Part-time, floor low-range lever | AWD available |
Zoom out and the bet gets louder. Kelley Blue Book put the average U.S. new-vehicle transaction price at a record $51,109 in October 2026, and said full-size pickups averaged $67,912. Small and mid-size pickups averaged $43,891. A T4X at $21,500 would sit $22,391 under that compact-truck average and $46,412 under the full-size ticket, if the estimate survives until 2028.
Three Knobs and a 20-Year Catalog
The mechanical pitch is the reason 50,000 people paid before seeing a cabin. REO is skipping turbocharging, direct injection, and stop-start so a four-cylinder can be fixed with ordinary shop tools. The company is aiming at a 500,000-mile powertrain life, and it prints the caveat on the spec page: that is a design target, not a warranty and not a test result.
Zach De Bernardi, REO founder and CEO, set cabin rules before the interior reveal, which is scheduled for 2027. Power windows are in; hand cranks are out. Seat adjusters will be manual. A 6-foot-5 driver is supposed to fit. A bit set in the glovebox is specified to match every fastener on the truck, and 120-volt sockets plus pre-wired auxiliary switches are meant to keep owners from drilling the firewall.
Nothing you need to drive the truck lives behind glass. And nothing that steers, stops, or shifts gets touched by over the air software updates, and nothing gets taken away over the air either.
Zach De Bernardi, founder and CEO, REO November 16 press release
The cluster will still be digital, with a screen for maps and media. The driving controls are supposed to stay analog even if that screen dies. On the company’s own X thread, the same wish list kept coming back: more torque than an unpublished four-cylinder, a locking rear, a serious heater, and no telematics. REO already lists the locker. Diesel, it says, can come later, on purpose, once it is cheaper and proven. The grille is sized for other engines and for owner swaps.
THE FIX-IT-YOURSELF KIT
- Controls: Floor shifter, transfer-case lever, and a lever handbrake that still work if the 12-volt system is dead, plus three climate knobs and rocker window switches.
- Diagnostics: A free service manual and a $30 scanner, with no parts-pairing.
- Parts: A public catalog REO says it will back for 20 years, open enough that approved makers can sell direct to owners.
- Policy: No subscriptions and no feature gating, with bolt-on fender flares so a bent corner is a panel, not a welded body.
Some of the people who reserved wanted a 1990s Ranger face and are already calling the stacked lights too smooth, closer to a current electric truck than to a square farm tool. The studio’s job was to make a new truck look old without hiding LED lamps and crash structure, and that tension is baked into the bet.
A Dallas Broker Bought a Dead Badge
De Bernardi is a former Dallas real estate broker. He has said he could not find a compact ladder-frame truck with 4WD, a naturally aspirated gas engine, and nothing extra, so he set out to build one. He has also said the REO vehicle marks had been abandoned and that his company filed in Class 12 and the other classes a direct-to-consumer car business needs.
I knew exactly the vehicle I wanted, but when I looked at today’s truck market in the United States, I couldn’t buy it anywhere. Trucks have become too big, too complex, and too expensive, and a lot of other customers just like me want a genuine alternative.
Zach De Bernardi, founder and CEO, REO November 16 press release
He calls the result an Ameri-Kei truck: Japanese kei-class simplicity, scaled to U.S. work. REO’s reserve page adds a market reason for staying on gas. More than 9 in 10 new vehicles sold in the United States in the second quarter of 2026 still burned gas, counting hybrids, and a fill-up still takes about five minutes in any town.
The name is older than the bet. Ransom E. Olds founded REO in Lansing, Michigan, in 1905 after leaving the firm that became Oldsmobile. The Speed Wagon arrived in 1915 as a light truck that could outrun the 15 mph workhorses of the day, and it is an ancestor of the American pickup. The Illinois band later took the truck’s name. REO quit cars in 1936, spent decades as a truck maker under White and then as Diamond Reo, and the Diamond Reo business went into bankruptcy in 1975.
FROM LANSING TO DALLAS
- 1905: Ransom E. Olds founds REO Motor Car Company in Lansing, Michigan.
- 1915: The Speed Wagon light truck goes on sale and becomes the company’s signature commercial vehicle.
- 1936: REO ends automobile production and leans on trucks.
- 1975: Diamond Reo files for bankruptcy and the Lansing chapter of the name closes.
- June 16, 2026: REO Industries, a Dallas corporation, opens $25 reservations with no truck on a road.
- November 16, 2026: The T4X, T4C and S4C exteriors are revealed and paid holds cross 50,000.
Frank Stephenson’s studio, frankstephenson design, did the new bodies. Stephenson’s credits include the modern MINI, the Fiat 500, and the McLaren P1. The stance, the studio says, borrows from the American bison: broad shoulders, planted mass, a hood bulge the team treated as non-negotiable. Quad LED lamps are sized to swap with off-the-shelf units. Vertical handles sit above the beltline. Tow hooks are fitted front and rear, with a hidden front receiver behind the plate mount.
Stephenson’s brief, in his own words, was three plain adjectives: simple, honest, and built to last. Sajay Shinu, a senior designer at the studio, said every line started with a pencil, and that any piece there only for looks had to go if it got in the way of work.
Where the Engine and the Factory Are
REO has not named the four-cylinder’s supplier, displacement, horsepower, or torque, and it has not named the Texas plant. Pilot T4X builds are planned for 2027 at an existing brownfield site chosen for Texas suppliers and proximity to Mexico. The T4C and S4C follow the two-door. Those are targets, the reserve page says, not promises.
WHAT WE KNOW
- The commercial terms: $25 holds are refundable, prices are starting estimates, and REO plans to sell direct with no dealers.
- The hardware claim: One ladder frame, a gas I4, a standard manual, mechanical 4WD, and physical driving controls across all three body styles.
- The calendar: Interior in 2027, orders in 2028, first T4X deliveries in late 2028 or early 2029.
WHAT IS UNCONFIRMED
- The engine: Supplier, size, and output remain unpublished, so the 5,000 lb tow target and 22-25 mpg band cannot be checked.
- The plant: Texas assembly is planned at an unnamed brownfield factory; no address, workforce, or production rate is public.
- The street price: Final numbers come with a 2028 order agreement, and several states have no launch date.
De Bernardi’s wager is that enough buyers still want a small, cheap, gas truck they can work on, and that they will wait while Ford sells Mavericks and full-size crews keep clearing $67,912. Fifty thousand $25 holds say the hunger is real. The engine, the plant, and the 2028 order form are the parts of the bet that have not yet been asked to start.
-
NEWS3 months agoMeta’s Smart Glasses Sell a Light That Needed Two Patches
-
NEWS3 months agoApple’s New Mac Studio Clusters Local AI on the Desk
-
NEWS3 months agoGoogle’s Free AI Pro Year Is Three Different Deals
-
NEWS3 months agoSong Yadong Stops Umar Nurmagomedov the Only Way Left
-
ENTERTAINMENT3 months agoLanterns Puts Sinestro in a Cell and Lets Him Talk
-
NEWS3 months agoThe Mahape Fake Apple Raid Repeats a Dual-Shift Pattern
-
ENTERTAINMENT3 months agoLUN8’s First London Concert Filled a 620-Cap Club
-
NEWS3 months agoOpenAI Agents Hit Hugging Face to Cheat a Test
